Many of you might think that a storm only produces strong winds, hail, and rain, which your roof can resist easily. But have you ever wondered what happens up there during severe weather? A storm brings in strong winds that can create heavy pressure on various stress points, eventually compromising the roof’s overall structure. Although the roofs are designed to withstand all kinds of weather conditions, damages are bound to occur in the event of hazardous weather issues.

This blog discusses how to identify initial damage and why hiring a professional roofing contractor can benefit you.

Signs of Extensive Wind Damage on Roof

Strong winds, especially those from storms or hurricanes, can cause severe damage to your roofing system. Although certain signs are evident, others are not very clear, but they build up over time, resulting in long-term problems unless it is addressed early enough. So, it is better to know what to look out for, just to ensure that you identify issues early and avoid more serious and expensive repairs.

Some common signs of extensive wind damage include:

• Lost or loosened shingles: Strong winds may either tear shingles away or loosen them, leaving the layers below exposed.
• Uplifted shingles: Shingles that have not been torn off but have been lifted may have lost their seals, allowing moisture to get underneath.
• Creased or curled shingles: This is usually a sign that they have been bent back and forth in the wind, weakening the shingles.
• Leaks or water stains: Indoors, there may be signs of watermarks on the ceiling or walls, which often indicate pathways to the roofing materials that have been weakened by wind.
• Pile-up of debris: Branches, leaves, or even broken trees on your roof may cause damage due to the wind.

How Can You Check Wind Damage on Your Roof?

If your area has recently experienced high winds or a storm, conducting a roof inspection as soon as it’s safe is a good idea. Here’s a systematic approach to checking for wind damage, focusing on vulnerable areas that are often overlooked.

Check the Roofing Cement

Roofing cement is typically used to seal flashing, fix minor leaks, or secure loose shingles. After a windstorm, inspect areas where roofing cement has been applied—especially around vents, valleys, and flashing joints.

Look for:

• Cracks or separation: This indicates that the wind has caused movement, creating openings through which water can enter.
• Dry or crumbling cement: Roofing cement may lose its adhesion over time, especially after extreme weather fluctuations. Wind can accelerate this process, making the roof more vulnerable.

If you notice deteriorated cement, it’s essential to reapply or patch it quickly to maintain the roof’s water resistance. Call in one of your trusted roofing contractors and get the job done in no time.

Soffits and Fascia May Be Damaged

Soffits (the underside of the eaves) and fascia boards (the trim just under the roof edge) are aesthetic and essential for proper ventilation and protection against pests. Wind can:

• Crack or warp vinyl soffits
• Tear away lightweight fascia boards
• Create gaps where rain and insects can enter

Inspect for looseness, holes, or discoloration, which may indicate water intrusion. Damaged soffits and fascia can also impact your attic ventilation, leading to higher energy bills or moisture buildup indoors.

Tears in Flashing

Flashing is the metal or waterproof membrane that seals the joints and transitions on your roof, especially around skylights, vents, chimneys, and valleys. Wind damage to flashing is typical, yet it often goes unnoticed until a leak forms.

Signs of flashing damage include:

• Visible rust or corrosion
• Bent or lifted sections
• Missing fasteners or sealant
• Loose edges that produce flapping sounds in the wind

Even minor tears or lifted flashing can allow wind-driven rain to seep beneath your roofing material, causing rot or mold over time.

Flat Roof

The flat roofs are more prone to wind lifting than pitched roofs. Wind pressure may cause suction, which draws parts of the roof membrane, especially on the edges.

Inspect for:

• Bubbling or blistering of the surface membrane
• Exposed underlayment or insulation
• Ponding water, which may indicate improper drainage or structural warping caused by wind
• Loose seams or visible gaps at the roof edges

Because flat roofs often use membrane-based materials, any displacement or puncture can lead to significant leaks. Routine inspection is crucial, especially after a storm. You can contact a roof repair contractor and have your roof inspected periodically.

Why Should You Hire Professionals for Roof Repair?

When your roof shows signs of damage or wear, it might be tempting to tackle repairs yourself or hire the cheapest option. However, hiring professional roofing contractors offers long-term benefits that far outweigh short-term savings. Here’s why turning to experts is the more intelligent choice:

Have Better Quality Material

Professional roofers can access top-tier roofing materials that aren’t always available to the general public. They know which materials work best for your specific roof type and climate, ensuring durability and improved longevity. With better materials, your roof can withstand harsh weather conditions and require fewer repairs in the future.

Better Roof Warranty Opportunities

Hiring licensed professionals often grants you access to manufacturer-backed warranties that protect materials and labor. These warranties can save you thousands if issues arise down the line. DIY repairs or work by unqualified contractors typically void these warranties.

Reliable Workmanship

Experienced roofing professionals bring years of training and hands-on experience to every job. Their skills ensure the work is done correctly the first time, minimizing the risk of recurring problems such as leaks, poor insulation, or structural damage. Reliable workmanship also increases the value and appearance of your home.

Have Proper Safety Training

Roof work is dangerous without the proper safety equipment and training. Professionals are trained to handle heights, unstable surfaces, and hazardous conditions using the correct protocols and gear. It protects the workers and shields homeowners from liability in the event of an accident.

Get in Touch With Our Professionals Today!

If your roof has been damaged, it’s better to call us at Triple J INC. Roofing. We use high-quality materials to help fix the damage quickly and prevent it from recurring in the future. Our expert team responds quickly and will reach your doorstep once you call us.

We ensure a seamless process and satisfying results. Contact us or schedule an appointment with our expert today!